Serving the Lubbock area  ·  (806) 853-5509  ·  Open Mon-Sun 7am-7pm
📞 (806) 853-5509 Free Quote

Metal Roofing in Ralls, TX (79357) · Local Professionals

Lubbock Metal Roofing · Fast response in Ralls and the Lubbock area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+207Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ralls is a small town where the wind never stops and the hail never asks permission. Most of the homes here are older brick and frame houses with shingle roofs that have taken a beating for decades, and the flat ground and wide skies mean there is nowhere for a storm to hide. If you live near the Ralls High School or along the main drag on Highway 62, you already know what a hailstorm can do to an aging roof.

That is why homeowners in Ralls (79357) call Lubbock Metal Roofing. We are based in Lubbock, just up the road, and we have seen how the South Plains weather treats roofs in Crosby County. Whether you are near the Ralls Golf Course or out on a county road surrounded by cotton fields, we can get your metal roof installed, repaired, or replaced right the first time.

Metal Roofing in Ralls (79357)

Ralls sits on the same flat Llano Estacado as Lubbock, with hard caliche soil and shallow playa lakes that hold water after a big rain. The housing stock here is mostly older brick and frame homes, many built between the 1920s and 1960s, with low-pitched shingle roofs that are prone to hail damage and wind uplift. You will also find a few newer homes and some metal farm buildings on the edges of town. The wind comes across open fields with nothing to slow it down, so fasteners work loose and seams can separate over time. Our team knows how to handle the tight lots near the downtown square and the wide-open spaces out by the grain elevators. We have worked on everything from small bungalows to commercial shops, and we understand the local building department and what it takes to get a permit for a re-roof or a full replacement.

We have been serving Ralls and the surrounding Lubbock area for years, and we know the local suppliers, the weather patterns, and the common problems that pop up. When we show up, we are not guessing.

Our services in Ralls

How a Job Works in Ralls

Step 1: You call us at (806) 853-5509 or fill out a form, and we set up a free on-site assessment. We look at your current roof, check for hail damage, loose fasteners, or leaks, and talk through your options. We will give you a written estimate before any work starts.

Step 2: Once you approve, we schedule the work. In Ralls, we often deal with tight driveways and older neighborhoods where we need to be careful about parking and access. If your home is in a historic district or has an HOA, we can help coordinate the design review and permit paperwork. We pull the necessary permits from the city and make sure the job is done to code. For metal roof over shingles, we check that your existing roof has no more than the allowed number of layers.

Step 3: After the work is done, we clean up the site completely and walk you through the finished roof. We make sure you know what was done and how to maintain it. We do not leave until you are satisfied.

Pricing for metal roofing in Ralls depends on the size of your roof, the material you choose, and the condition of your current roof. For a typical home, metal roof installation starts at $8 per square foot, standing seam starts at $10, metal roof replacement starts at $9, and metal roof over shingles starts at $7. If you just need a repair, that starts at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm and wind damage inspections. Call us at (806) 853-5509 to get a ballpark figure for your specific roof.

My house near the Ralls downtown square has an old shingle roof that is about 20 years old. Can you install a metal roof over it?
Yes, we offer metal roof over shingles (retrofit) starting at $7 per square foot. We will inspect your existing roof to make sure it is structurally sound and that the number of layers is within code. If it is not, we will recommend a full replacement. We handle permits with the City of Ralls and make sure the job is done right.
A storm just blew through Ralls and lifted some panels on my roof. How fast can you get here?
We offer free storm and wind damage inspections and can usually get to Ralls within a day or two after a storm. Call us at (806) 853-5509 to schedule an inspection. We will document the damage for your insurance claim and make temporary repairs if needed to prevent further leaks.
What is the typical cost for a metal roof on a 1,500 square foot home in Ralls?
For a 1,500 square foot home, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam would be closer to $10 per square foot. The total depends on roof pitch, accessibility, and whether we need to remove the old roof. Call us for a free estimate tailored to your home.
Do I need a permit from the City of Ralls to replace my roof?
Yes, roofing permits are commonly required for a full replacement or re-roof in Ralls. The thresholds and fees vary, so we always check with the local building department before starting. We handle the permit application and inspections for you.
My neighbor and I share a property line, and I want to make sure the new roof does not encroach. What should I do?
We always respect property lines. Before we start, we will review your plat or survey to confirm the boundaries. If there is any question, we recommend having a survey done. If you are in an HOA, we can also help you get approval for the roof style and color.
Are you fully insured for work at my Ralls property?
Yes, we carry general liability insurance and workers' compensation coverage. You can have peace of mind knowing our team is covered while working on your home.
What maintenance does a metal roof need in Ralls to handle the summer heat and winter ice?
In Ralls, metal roofs should be inspected annually for loose fasteners, especially after high winds. We recommend checking the flashing around chimneys and skylights, and clearing debris from gutters. In winter, ice damming can occur at the eaves, so proper insulation and ventilation help. We offer maintenance inspections and can replace screws or re-fasten panels as needed.
Why choose us?

Trusted professionals in Lubbock

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lubbock

All your work handled by qualified professionals in Lubbock

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

207+ Verified Client Reviews in Lubbock

⭐⭐⭐⭐⭐ 4.9/5 · 207 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lubbock · Response within 24h · No commitment · ☎ (806) 853-5509

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lubbock ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm