Serving the Lubbock area  ·  (806) 853-5509  ·  Open Mon-Sun 7am-7pm
📞 (806) 853-5509 Free Quote

Metal Roofing in Levelland, TX (79336) · Local Professionals

Lubbock Metal Roofing · Fast response in Levelland and the Lubbock area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+207Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Levelland sits right on the Llano Estacado, flat as a table and wide open to every hailstorm that rolls across the South Plains. The mix here is telling: older brick ranches near the courthouse square, ag shops and metal barns out toward the oilfield edges, and newer homes filling in around Levelland High School and South Plains College. Low-pitched shingle roofs take a beating from hail, wind, and blowing dust, and that is exactly the kind of roof we fix and replace every week.

Homeowners in 79336 call Lubbock Metal Roofing because we know what fails here. Fasteners back out, seams separate, and hail bruises shingles until the next hard rain finds a way in. We are based in Lubbock, fully insured, and we make the drive to Levelland regularly for installations, repairs, and storm inspections. When the dust clears after a spring squall, we are the crew you want on your roof.

Metal Roofing in Levelland (79336)

Levelland is ranch country and oilfield country at the same time, and the roofs show it. On the residential side, you have 1950s and 1960s brick ranches with low-slope shingle roofs and carports, plus newer brick homes with steeper composition roofs. Out on the edges of town, cotton gins, grain elevators, and metal farm shops sit among the cotton and sorghum fields, and those buildings need roofing that can handle heat, dust, and hail without constant patching. The ground here is hard caliche, which makes proper anchoring and flashing details more important than in softer soils. Shallow playa lakes hold water after storms, so drainage away from the roof and gutters matters. And with almost no trees to break the wind, straight-line gusts and hail hit roofs head-on. We size fasteners and seam spacing for that reality, not for a milder climate.

Our team has worked across the South Plains, from Levelland and Sundown to Opdyke and the surrounding ranch roads. We have seen how hail bruises shingles, how wind peels back panels that were not fastened right, and how dust works into every gap. That experience is why we lean toward standing seam and heavier gauge panels for Levelland properties that need to last.

Our services in Levelland

How a Job Works in Levelland

Step 1: You call us at (806) 853-5509 or request a free estimate. We schedule a time to walk your roof and property, check the decking, flashing, and fasteners, and talk through what you are seeing: a leak, hail damage, or just an aging roof. We give you a written scope and a clear price, and we answer questions about insurance documentation if you are filing a claim.

Step 2: Once you approve, we pull the required roofing permit through the City of Levelland and coordinate any inspection timing. On install day, our crew protects landscaping, stages materials so driveways and carports stay usable, and works around the tight lots and carports common in the older parts of town. For commercial and agricultural buildings, we plan around your operating hours so the shop or barn stays usable.

Step 3: We clean the site, magnet-sweep for nails, and walk the finished roof and gutters with you. You get a final look, a clear explanation of what was done, and our contact info for any follow-up. We leave your property clean and the roof ready for the next storm season.

Pricing in Levelland depends on the roof, not just the square footage. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, and standing seam around $10. Replacement starts near $9 per square foot, and metal shingle or stone-coated steel also starts around $9. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. The big cost factors are roof size and pitch, how many layers are already on the roof, access around carports and tight lots, the condition of the decking, and whether the job is an emergency. We give free estimates in Levelland and the surrounding area, so call (806) 853-5509 and we will put real numbers on your roof.

My ranch house near the courthouse square has a low-pitched shingle roof and I keep getting leaks after hail. What is the best metal option for that kind of roof in Levelland?
Low-slope roofs are common in the older parts of Levelland, and they are where we see the most repeated leaks. For a low pitch, standing seam with the right seam height and proper underlayment is usually the best long-term fix, and a retrofit over the existing shingles can work if the decking is sound and the code allows the layer count. We check the decking and flashing first, because hail often damages the shingle surface while the real leak starts at a fastener or a flashing gap. Call us and we will look at the pitch and condition before recommending a panel.
A storm just peeled back panels on my shop roof outside Levelland. How fast can you get out for storm damage?
We treat wind-lifted and peeled panels as a priority because open roofs lead to water damage fast. Call (806) 853-5509, and we will schedule the soonest available inspection, often within a day or two depending on storm volume across the South Plains. We document the damage for your insurance file, make safe what can be made safe, and give you a repair or replacement scope. We never promise coverage, but we do give you the photos and notes your adjuster will want.
What does a typical metal roof replacement cost for a 1,500 square foot home in Levelland?
For a home that size, a straightforward replacement often lands in the range of the published starting figures, so roughly $9 per square foot and up for replacement, with standing seam closer to $10 and up. The final number depends on pitch, how many old layers are removed, decking condition, flashing and skylight work, and access. A retrofit over shingles can lower the cost if the roof qualifies. We give a free on-site estimate so you get a real number for your house, not a guess.
Do I need a permit to replace my roof in Levelland, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Levelland, and the thresholds, fees, and inspection requirements are set by the City of Levelland. We confirm the current rules with the city before work starts and pull the permit as part of the job. If your home is in a historic district or a neighborhood with design review, we also check whether the panel profile or color needs approval. Rules can change, so we always verify with the local building department rather than assume.
My neighbor and I disagree about where the property line is near our shared fence, and I want to replace my roof. How do you handle that?
We keep our work inside your property line and protect the neighbor's side as much as possible. If the roof edge, gutters, or drainage run close to the line, we talk through it with you before we start so there are no surprises. For HOA neighborhoods, we can coordinate the color and profile approval with your board. We do not survey property lines, so if there is a real boundary question, it is worth confirming before work begins.
What kind of insurance coverage does your crew carry when working on my Levelland property?
We are fully insured, with general liability and workers' compensation coverage. That means if something goes wrong on your property, you are not left holding the risk, and our crew is covered on the job. We are happy to provide proof of insurance before work begins. Call (806) 853-5509 with any questions about coverage.
What should I do to maintain a metal roof in Levelland between hail seasons?
The main things we see in Levelland are backed-out fasteners, dust and grit in the seams, and gutters clogged after dust storms and spring rains. Once a year, and after any big hail event, walk the perimeter and look for lifted panels, loose screws, or granules in the gutters. Keep the gutters clear so water moves away from the caliche and the foundation. Have a professional inspection after a major storm, since hail damage to panels and fasteners is not always visible from the ground. A little preventive attention goes a long way here.
Why choose us?

Trusted professionals in Lubbock

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lubbock

All your work handled by qualified professionals in Lubbock

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

207+ Verified Client Reviews in Lubbock

⭐⭐⭐⭐⭐ 4.9/5 · 207 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lubbock · Response within 24h · No commitment · ☎ (806) 853-5509

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lubbock ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm