Serving the Lubbock area  ·  (806) 853-5509  ·  Open Mon-Sun 7am-7pm
📞 (806) 853-5509 Free Quote

Metal Roofing in Abernathy, TX (79311) · Local Professionals

Lubbock Metal Roofing · Fast response in Abernathy and the Lubbock area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+207Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Abernathy is a farm town where the wind never stops and the roofs take a beating. Most homes here are single-story brick or wood-frame ranches built between the 1950s and 1980s, sitting on wide lots along Highway 87 and close to the grain elevators that mark the skyline. The land is flat as a table, with cotton fields and grain bins just past the city limits, and that open exposure means hail, straight-line winds, and dust storms hit every roof head-on.

Homeowners in Abernathy (79311) call Lubbock Metal Roofing because we understand how metal performs on these plains. We have replaced corrugated panels on barns near the Abernathy Co-op Gin and fixed screw-backed roofs on houses off 1st Street. Whether your roof is on a 1960s ranch home or a newer metal shop building, we know the failure points and how to fix them for good.

Metal Roofing in Abernathy (79311)

Abernathy sits on the Llano Estacado, where the soil is hard caliche and the wind blows almost daily. That combination is tough on roofs. Most properties here are either older ranch homes with low-pitch roofs or agricultural buildings like grain bins and machine sheds. The flat terrain means water pools after storms, especially where playa lakes form on the edges of town. We see a lot of failed fasteners on corrugated panels because the constant wind works screws loose over time. Separated seams and flashing gaps are common too, especially on roofs that have seen 20 or more years of Texas sun. Our team knows how to handle the tight access on older lots and the wide-open exposure on farm properties. We also deal with the dust that gets into every crevice and can hide small leaks until they become big problems.

We have been serving Abernathy and the surrounding Lubbock area for years, and we have worked on everything from small residential repairs to large commercial and agricultural roofs. Our crews are trained to spot the specific issues that come with this climate: hail dents, wind-lifted panels, and screw fatigue. We use materials that are rated for high wind and impact, and we always follow local building codes.

Our services in Abernathy

How a Job Works in Abernathy

Step 1: You call us at (806) 853-5509 or fill out our contact form. We schedule a free on-site assessment at your property in Abernathy. Our inspector will walk the roof, check for leaks, loose fasteners, and storm damage, and then give you a written estimate with options. We explain what we find and answer any questions.

Step 2: Once you approve the estimate, we pull the required permits from the city of Abernathy (or the county if you are outside city limits). We schedule the work around your timeline. On older homes with tight driveways or alleys, we use smaller equipment to avoid damaging fences or landscaping. For agricultural buildings, we coordinate with your schedule so we do not interfere with harvest or daily operations. We keep the job site organized and protect your property during the work.

Step 3: After the roof is installed, we do a thorough cleanup. We magnet-sweep the yard for nails and debris, and we haul away all old materials. Then we walk the finished roof with you to make sure you are satisfied. We do not leave until you sign off and the property is clean.

Pricing for metal roofing in Abernathy depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof installation starts at $8 per square foot, and standing seam runs about $10 per square foot. If you are replacing an old roof, that starts at $9 per square foot, and installing metal over existing shingles (retrofit) starts at $7 per square foot. For agricultural buildings or corrugated panel roofs, prices start at $5.50 per square foot. Repairs are more straightforward: most metal roof repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for inspections and storm damage assessments. Call us at (806) 853-5509 to get a precise quote for your property.

My roof is on a 1950s ranch home near the Abernathy school, and the screws keep backing out. What is the best fix?
That is a common issue on older corrugated roofs in Abernathy. The constant wind and thermal movement work screws loose over time. We recommend a full screw replacement with larger, neoprene-washered fasteners and adding extra screws where needed. We also check for enlarged holes and use oversize screws or rivets if necessary. For roofs over 20 years old, we may suggest a retrofit with a standing seam system, which eliminates exposed fasteners entirely.
A storm just blew through and lifted some panels on my barn. Can you come out today?
Yes, we offer emergency storm damage repair in Abernathy. Call us at (806) 853-5509 and we will dispatch a crew as soon as possible. We can tarp or secure the roof temporarily to prevent further water damage, then schedule permanent repairs. We also document the damage for insurance claims if needed.
What is the average cost to replace a metal roof on a 1,500-square-foot home in Abernathy?
For a 1,500-square-foot home, a basic metal roof replacement starts around $9 per square foot, so you are looking at roughly $13,500 for materials and labor. That price can go up if the roof has complex pitches, multiple layers of old shingles, or if you choose a premium material like standing seam or stone-coated steel. We provide free estimates so you can get an accurate number for your specific roof.
Do I need a permit to replace my roof in Abernathy?
Yes, the city of Abernathy requires a permit for roof replacements. The exact requirements and fees vary, so we always check with the local building department before starting work. We handle the permit application for you as part of the job, and we make sure the work meets all code requirements.
My neighbor's tree branches hang over my roof. Can I trim them, and does my HOA have rules about roof color?
In Texas, you generally have the right to trim branches that overhang your property line, but it is best to talk to your neighbor first. As for HOA rules, many neighborhoods in Abernathy have design guidelines that may restrict roof color or material. We can help you check with your HOA before you choose a new roof, and we can provide color samples that meet their requirements.
Are you fully insured for roofing work in Abernathy?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the job.
How often should I inspect my metal roof in Abernathy, and what should I look for?
We recommend an annual inspection, especially after hail season in spring and before winter. Look for loose or missing screws, dented panels, rust spots, and any signs of water stains on the ceiling. Also check the flashing around chimneys and vents. If you see anything unusual, call us for a free inspection. Regular maintenance can catch small issues before they become expensive repairs.
Why choose us?

Trusted professionals in Lubbock

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lubbock

All your work handled by qualified professionals in Lubbock

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

207+ Verified Client Reviews in Lubbock

⭐⭐⭐⭐⭐ 4.9/5 · 207 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lubbock · Response within 24h · No commitment · ☎ (806) 853-5509

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lubbock ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm